PET Stretch Blow Molding Machine - CMA-2000BD / 2000CS / 2000CD

PET Stretch Blow Molding Machine - CMA-2000BD / 2000CS / 2000CD - Chia Ming Machinery Co., Ltd.

CMA-2000BD / 2000CS / 2000CD

Automatic PET Stretch Blow Molding Machine

This is a new generation of fully automatic and versatile machine for mass production of PET bottles and jars with volumes up to appoximatly 200-6000ml. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving of manpower.

Specifications:

Model		CMA-2000BD	CMA-2000CS	CMA-2000CD
Container	Max. neck diameter	Φ38 – Φ90mm	Φ63 – Φ120mm	Φ63 – Φ120mm
	Max. production capacity	1200pcs/hr	600pcs/hr	1100pcs/hr
	Max. body diameter	120mm	180mm	180mm
	Max. container height	320mm	340mm	340mm
	Max. bottle capacity	2000ml	6000ml	6000ml
	No. of cavity	2	1	2
Mould	Carry pitch	152.4mm	228.6mm	228.6mm
	Mould center distance	152.4mm	228.6mm	228.6mm
	No. of preform mandrels	44	28	38
Heating oven	No. of oven	3	3	4
	No. of infrared heaters in each oven	8	9	9
	Heating load (max.)	48	54	72
Air pressure	Low pressure	7kg/cm2	7kg/cm2	7kg/cm2
Air pressure	High pressure	35kg/cm2	35kg/cm2	35kg/cm2
Cooling water	Cooling capacity	18000kcal/h	14000kcal/h	18000kcal/h
	Water consumption	80L/min	70L/min	80L/min
	Water temperature	10~12℃	10~12℃	10~12℃
	Pressure	2bar	2bar	2bar
Total consumption power		69kw	59kw	77kw
Machine dimension		3.51.92.2m	3.451.92.2m	4.52.252.2m
Machine weight		6.5ton	6.5ton	7ton

All specifications and designs are subject to change without notice.

Production Samples: